Copyright © 2024 Tedd Engineering Limited. All rights reserved.
Menu
Hardwearing and robust, our IO modules are designed in-house and manufactured at facilities in the UK. Tedd Engineering IO modules can be found at the heart of machines all over the globe. As each machine has a unique layout and requirements, our bespoke design service will select the best configuration of modules for the job.
132.5 mm x 104.5 mm x 34.5 mm
186 mm x 160 mm x 53.25 mm
122 mm x 101.5 mm x 33.25 mm
252 mm x 162 mm x 90 mm
317 mm x 152 mm x 57.2 mm
136 mm x 207.5 mm x 25 mm
317 mm x 152 mm x 57.2 mm
317 mm x 152 mm x 57.2 mm
136 mm x 207.5 mm x 25 mm
Designed as a stand-alone module for retro fitting on older machines. Allows for tracking, tipping grid & feeder control.
136 mm x 207.5 mm x 25 mm
240 mm x 126 mm x 50 mm
Modems built into the control system allows for remote communication between machines and data collation via Tedd Telematics
158 mm x 127.5 mm x 66.5 mm
330 mm x 210 mm x 63.5 mm
The Module converts a CAN signal into pre-programmed mono audio clip via line out for an external amplifier and speaker system. Offering a more detailed notification system compared to just a traditional klaxon or horn. Customised audio can be programmed for unique branding or specific languages.
102 mm x 132.5 mm x 31 mm
The Crusher Breakout Module simplifies wiring looms and maintenance by locally creating a wiring breakout point on the machine. Reducing wiring installation and repairs.
297 mm x 243.5 mm x 47.2 mm
The Small Crusher Breakout Module simplifies wiring looms and maintenance by locally creating a wiring breakout point on the machine. Reducing wiring installation and repairs.
243.5 mm x 194.5 mm x 33.5 mm
Designed specifically for use on Cone Crushers. The Rear Lube Breakout Module simplifies wiring looms and maintenance by locally creating a wiring breakout point on the machine. Reducing wiring installation and repairs.
243.5 mm x 194.5 mm x 33.5 mm
The product information supplied is not guaranteed and is subject to change without notice.
Head Office
Unit 1, Tupton Way,
Holmewood Industrial Park,
Chesterfield, Derbyshire,
S42 5BX
United Kingdom
Northern Ireland
Unit 2,
Creagh Industrial Park
Toomebridge,
BT41 3UF
United Kingdom
England: +44 (0)1246 690099
Northern Ireland: +44 (0) 2879 292020
Email: sales@teddengineering.com
Copyright © 2024 Tedd Engineering Limited. All rights reserved.
